Drawing
General Specification
| Item | Standard value | Unit |
| LCD Size | 2.2 | inch |
| Dot Matrix | 176(RGB) × 220 | pixel |
| Module Size | 41.90 × 55.26 × 2.35 | mm |
| Active Area | 34.85 × 43.56 | mm |
| Dot Pitch | 0.198 × 0.198 | mm |
| Pixel Configuration | R.G.B. Stripe | – |
| Color depth | 262K | – |
| Display Mode | Normally white, Transmissive | – |
| Technology Type | a-Si | – |
| Viewing Direction | 6 o’clock | – |
| Gray Scale Inversion Direction | 12 o’clock | – |
| Driver IC | ILI9225G | – |
| Interface | 16-bit MCU | – |
| LED Numbers | 3 LEDs | – |
| Weight | TBD | g |
Interface Definition
| Pin No. | Symbol | Type | Description |
| 1 | D0 | I/O | Data bus |
| 2 | D1 | I/O | Data bus |
| 3 | D2 | I/O | Data bus |
| 4 | D3 | I/O | Data bus |
| 5 | GND | P | Ground |
| 6 | IOVCC | P | Power supply for I/O |
| 7 | CS | I | Chip Select signal |
|
8 |
RS |
I | Display data/command selection pin in MCU interface. DCX=’1′: display data or parameter.
DCX=’0′: register index / command. |
| 9 | WR | I | Write signal |
| 10 | RD | I | Read signal |
| 11 | LEDA | P | LED driving anode |
| 12 | LEDK1 | P | LED driving cathode |
| 13 | LEDK2 | P | LED driving cathode |
| 14 | LEDK3 | P | LED driving cathode |
| 15 | D4 | I/O | Data bus |
| 16 | D8 | I/O | Data bus |
| 17 | D9 | I/O | Data bus |
| 18 | D10 | I/O | Data bus |
| 19 | D11 | I/O | Data bus |
| 20 | D12 | I/O | Data bus |
| 21 | D13 | I/O | Data bus |
| 22 | D14 | I/O | Data bus |
| 23 | D15 | I/O | Data bus |
| 24 | RESET | I | Chip reset signal |
| 25 | VCI | P | Power supply for system |
| 26 | VCI | P | Power supply for system |
| 27 | GND | P | Ground |
| 28 | D5 | I/O | Data bus |
| 29 | D6 | I/O | Data bus |
| 30 | D7 | I/O | Data bus |
Previous Product Previous Product : 10.1'' 1080x800 Digital Interface LCD display Screen
