The SPI interface of 2.4 inch display is the most common in the color screen series of LCD display screen. SPI refers to the interface. It is widely used in all walks of life.
Today, Sinocrystal will introduce the basic parameters and industry applications of SPI interface for 2.4 inch display. I hope it can help you understand and select the SPI interface of 2.4 inch display .
The 2.4 inch SPI display interface is generally vertical, the most common resolution is 240*320, the overall dimension is relatively fixed, which is 42.72*60.26, the AA area is 36.72*48.96, and the thickness is about 2.0-2.5mm. The brightness belongs to ordinary brightness, about 200-500. IPS and TN can be selected from the perspective of SPI interface of 2.4 inch display. The operating temperature is -20-70 ℃, and the storage temperature is -30-80 ℃. SPI interface is a very standard interface with simple debugging and can be designed between 30-50pin. Aspect ratio: 3:2.
The SPI interface of 2.4 inch display is widely used in the industry, and its size is not large or small. It is widely used in instruments and meters. The instrument industry also has high reliability requirements, and the reliability of the 2.4 inch display is also very high. The SPI interface of 2.4-inch display screen is also widely used in the medical industry. At present, many intelligent medical products use 2.4 inch display SPI interface, such as home ventilator and some portable monitors. The application industry of SPI interface for 2.4 inch display is far more than this, including intelligent wearing and home appliances. Haifei Zhixian produces a series of SPI interfaces for 2.4 inch display all the year round, including 2.4 inch color screens and RGB for other interfaces. In addition, in addition to the resolution of 240*320, there are more high-definition 480*640, etc. Support touch screen, IC, FPC, backlight brightness and other customized services. Customers with 2.4 inch SPI interface requirements are welcome to consult at any time.
The 8 inch displays might be affected and delay for an accident.
New iPhone 13 Series will use On-Cell OLED Displays. And it that will be launched in the second half of this year will be exclusively supplied by Samsung Display (SDC)
This is the project management of how sinocrystal handle your customized project relate to displays.
The ILI9881C is a high-performance a-Si TFT LCD single-chip driver developed by ILI Technology Corp. With its excellent display performance and flexible configuration options, this driver meets the modern display device requirements for high resolution and color accuracy. This article will detail the supported resolutions, interfaces, and power supply voltage of the ILI9881C.
The GC9307, a TFT LCD driver with QVGA resolution, has gained widespread use among LCD module manufacturers since its launch. Sinocrystal are excited to share a series of practical insights we have gathered from using the GC9307 driver.
In the current field of electronic devices, the lcd display screen is a crucial part of human-machine interaction. However, traditional lcd display solutions often face structural design constraints, limiting their effectiveness in specific scenarios. Against this backdrop, UART lcd displays, which are easier to develop and do not require consideration of underlying display technology, are gradually emerging as the optimal solution to overcome these structural limitations.
